Electromagnetic Clutch Max Torq 14 24VDC
Incl. Tax
£515.56
Part Number/SKU:
30930-P-24
These Electromagnetic Clutches require running in to obtain the rated torque values. To run the unit in you should engage and disengage the clutch several times at high speed but with the hydraulic system unloaded.
When fitting theclutch please clean the pulley carefully to ensure that no oil or grease is left on the pulley.
When fitting cluches with front driving flange check for correct coupling alignment.
Do not exceed the maximum rated torque as this would cause the clutch to slip if this last for more than 5 seconds the coils would burn out.
When fitting theclutch please clean the pulley carefully to ensure that no oil or grease is left on the pulley.
When fitting cluches with front driving flange check for correct coupling alignment.
Do not exceed the maximum rated torque as this would cause the clutch to slip if this last for more than 5 seconds the coils would burn out.
| Delivery time | 30 |
|---|---|
| Model | 30930-P-24 |
| Max Torque daNm | 14 |
| Max Speed RPM | 3000 |
| Group 1 or 2 Pump | |
| Voltage V | 24 V DC |
| Pulley Diameter mm | 153 |
| Spline Adaptor to suit | 10044 for group 2 pump with 4mm key 10010 Group 1 pump with 2-4mm key |
| Output Spline | 35x31 DIN 5482 (Z-18) 18 tooth |
